![](/sites/all/themes/csa/img/header.small.4.jpg)
CSA Tuningcenter TFT 4
![](http://www.csa-sport.com/en/system/files/imagecache/landscape_full/CSA-Tuningcenter-TFT4U-1-7914-7913_mont_0.jpg)
BASE-UNIT
The equipment is run over the stone to establish a flat and even running surface from tip to tail. The resulting base structure is the foundation for the fine-tuning that follows.
DESIGN-UNIT
A base structure, designed to suit the customer’s wishes and the snow conditions, is then worked into the base surface. Pressure regulators ensure that a consistent coating (grind) is maintained from tip to tail. When viewed in cross-section, the base profile displays a vivid structure that results in optimal gliding qualities.
SIDELINE-UNIT
To ensure the same prerequisites for both left and right turns, the edges on both sides must be perfectly matched. For this reason, our machines allow both side-edges to be tuned simultaneously. Not only that, our high-tech procedure is designed for individuality – that’s why the side-edge level is easily adjustable.
BASELINE-UNIT
The most critical step in the tuning process is the precision polishing of the base edges. A smooth and polished edge enables easy turning and good grip in all snow conditions.
Technical Data | |
---|---|
Processing width: | 50 – 320 mm |
Processing length: | 900 – 2200 mm |
Use per season: | upwards of 5000 services |
Electrical connection: | 6 kW, Abs. 32 A |
Weight: | 4000 kg |
Capacity per hour: | up to 45 paires of skis / 20 snowboards |